Check out SimpliSafe’s holiday sale by visiting simplisafe.com/bisforbuild. Get 35% off their award-winning home security that keeps your home safe around the clock--plus a free HD camera! It’s really reliable, easy to use, and there are no contracts.

im just throwing it out there but why didn't he sell the Corvette so that someone else can enjoy it or improve it ? WTF what a waste

Shoulda put a Cummins in it.

I have a few comments. You plann on offloading this thing. You need to build everything more beefy as well as put the engine higher. If its too low you will smash the pan when that suspension bottoms out.

Good to see my guy grow, I subscribed when he got like 200 followers and i still enjoy what he does. 😄

Why don’t you cast a lightweight plastic mockup LS engine instead of using heavy real ones?

No v10 why ? Is no lamborgini !

I like the craftmanship, although I am getting tired of all LS engines O.o

You guys deserve a lift. At least 36” quick jacks. 👍

😮😮😮😮

what about doing the hole anyways for maintenance reasons?

Fabrication kings!

B is for Bang tidy 👌

You,r constantly talking about we but it should be Kyle and Oscar who are doing the job.

i love his laugh

You might want to leave that A/C on and use it as an endless air system to pump tyres, run air lockers and so on. Great build mate. Cheers Pat🇦🇺

"B is for broke" rear window banner when???

Interesting project and once again, Oscar is the star performer with his high-tech welding.

You should name it after an iconic movie car.

Did you consider offsetting the engine a couple of inches to the passenger side to balance the weight of the vehicle? How will the weight distribution effect the angle of jumps?

Anyone remember when this used to take 3 days?! Lol getting gooood guys!

👍👋👋👋😁

The engine mount flanges look like very thin metal? Are they the final cuts?

I actually preferred the time lapse with the voice-over. 👍🇬🇧

Fantastic builds!

I would gladly take that off-road corvette off your hands if you need it out of the way :)

Awesome build!

"We actually want to work with this exhaust" he says as the axels go through where the temporary exhaust collector is...

No way that’s $6 worth of levels, but if it is would you mind telling me where you got them?

The iconic LS is being used once again

Oscar is DAMN Good! --> "O is for Oscar did a great job T-shirts"

b is for oscar

What trans axle is gonna be run

Seeing all this fab work has me excited for the channel again 👌🏻

You should really switch to metric system. Quarter inch.. it's so hard to calculate to cm. But I get it, you are used to inches 13:50

At some point one of the “Big Time” custom car builders ( like Foose ) will make Oscar an offer he can’t refuse....

Should have made it AWD that would have been sick

TSP posted the engine I believe on Insta. 468 Tall deck LSX.

My favorite part was when they stood around staring at it for 20min

You should make the fire wall removable for quicker repairs.

Oscar my man 😃😃😃

Rip offroadvette

Bkwt build hurcan monster truck

You need one of those plasma cnc tables

This build looks like it will take for ever. You'd have more subs if you get committed to youtube✌

I could see a possible problem arising from bolting the front part of the engine mount through the seam of those 2 bars.

You could put a fuel cell in the frunk.

Dry sump oil system might be the way to go.

Might need to flip the headers you may run into clearancing issue with the exhaust and axles down the line, best of luck cant wait to see what's how this turns out :)

Amazing video man

I'm no expert but I think there are other engines than LS?

You could use your AC compressor as an onboard air compressor.

86 drift build would be dope

How much for what's left of the old car?

Not to Late but.... Should it be "Jump"acan or a "LEAP"racane???? then you can paint it GREEN with Gold Trim

Could you please reduce the speed on the build stuff? Even when choosing 0.25 playback speed, it still looks too quick to really see how things are done.

I learn more in your videos than I do in school lol thx

Any chance you wanna sell that vette chassis?

You should use the stock engine.

Maybe an external tank above the engine. Less heat? Cage it?

Harmon fuel cells in riverside California can make a bladder if you make the aluminum skins for both sides, they can do pump in tank or you can do an inline Bosch pump depending on how much fuel the tsp 427 needs. But the bigger you can make the tanks the better because you probably get like 3 to 4 miles a gallon.

Always an LS. Stop it. Do something original. Sick and tired of the LS swaps. Just my Opinion. Not hateing just a thought

I know they're a PITA to build, but a set of 180-degree or 8 into 1 headers would be awesome for this build. They'd PURELY be for looks and sound, but the exotic-sounding exhaust note would have people doing double takes wondering what's actually powering that beast!

NICE Job on those Motor Mounts Guys !!

What ever happened to your Eleanor build? I was kind of excited to see it get finished, but now I don't see any of the videos on your channel at all.

Guys it’ll be awesome if the jumpacan were all wheel drive

That looks like a Huracan't right now!

C6 corvettes have two triangular fuel tanks, check out matt fields FD C6 build he used a bladder tank I believe, not sure where he got it from though, but may be a nice bolt in part for this build Edit: Fields worked with Fuel Safe to get a custom cell made from the stock C6 tank.

Question for Chris and anyone who knows the answer, but what design software do you use to show the vehicle frame and edit the chassis? Thanks in advance and happy holidays.

This might be the best build on FRfix right now!!

ozcar

As this is an offroader, won't lowering the alternator put it in the way of all the sand, dirt, water and mud???

Why not mount the fuel cell in the frunk to try and even out the weight and to make your life so much easier?

Why not run a dry sump oil system

What happened to the Mercedes CLS coupe and do yo have any photos of it?

What happened to the boat?

B IS FOR LS SWAP EVERYTHING 😂😂😂😂🖒

I was wanting to know if you guys could help me out with something on my 97 Dodge Ram 1500 pickup the driver side portion of the bumper is pushed in and I don’t know how to pull it out so I could put the driver side headlight in

This guy takes LS swap everything to a whole new level

Great work guys

Moar BOAT!

You need a Lift some time cause poor Oscar

I may have missed a video about plans for this build but I was excited to see you deal with the headache of putting a Lamborghini engine back into this. Still excited to see the finished product.

Man you need to do a tour of the builds and have them actually finished. I follow all these builds for years and it seems like there's never an update on them after. Really thought I'd see SOMETHING at least with the z. Nothing even with the apocalypse cars... nothing with the lambo. I love this channel, but it would make it 100xs better to see these builds we follow for months, sometimes a year do something

I highly key want to see what you would something with a new nsx first manual

What happened to the Supra from Japan? Asking for a friend

Man I would build your own fuel sales cuz you know sky's the limit then you know

Your going to need at least 50G of fuel cell. Also, that transmission is suspect. You will need a final drive ratio of over 5-1. Can you get a R&P that steep for it? Does it have a torque damper in the input shaft or is it a solid shaft?

Good stuff.

Oscar did a great job.

Can i have corvette shell

And nobody is saying anything about the axles being in the same height as where his collectors from his exhaust end?

I dont know but Oscar seems to do most the work.... lol.. Like Oscar is Norm abrams and Chris is Bob Villa.

So uhhhh y’all are gonna throw the biggest blower you can find on the ls right?

You guys are freaking genius' Just love watching these videos. One of the many highlights of my day. Thanks

does anyone else think he should give the corvette to Cletus its like Leroy's crazy off-road brother

Can't wait to see this down the road jumping!

He did the LS swap!

just built 2 simple 15-gallon tanks they fuel pickups on the bottom T them together and use a fass fuel pump to draw and pump the fuel it will keep the fuel pressure you need and return the rest to the tanks because it returns its own extra fuel it wants to pump air into you pressure line we use them on diesel engines because air running thought the high pressure side can destroy you engines injectors and high pressure pump quckily

Weld the inside of the ebay mounts where they join to the engine too, look like they are only welded on the outside. Compared to the rest of the engine mount, those bits look weak.